Main technical parameters
Items | Characteristics | ||||||
Operating temperature range | -55℃--+105℃ | ||||||
Rated electrostatic capacity range | 220--2700uF | ||||||
Rated voltage | 6.3--35V.DC | ||||||
Capacitance tolerance | ±20%(25℃ 120Hz) | ||||||
Leakage current(uA) | 1≤0.01CVor3uA Larger C:Nominal capacity(Uf) V:Rated voltage(V) Reading after 2 minutes | ||||||
Loss angle tangent value(25±2℃ 120Hz) | Rated voltage(V) | 6.3 | 10 | 16 | 25 | 35 | |
tg | 0.26 | 0.19 | 0.16 | 0.14 | 0.12 | ||
If the nominal capacity exceeds 1000 uF, for each additional 1000 uF, loss angle tangent increased by 0.02 | |||||||
Temperature characteristic(120Hz) | Rated voltage(V) | 6.3 | 10 | 16 | 25 | 35 | |
Impedance ratio Z(-40℃)/ Z(20℃) | 3 | 3 | 3 | 3 | 3 | ||
Durability | In an oven at 105 ℃, apply the rated voltage for a specified time, and then place it at room temperature for 16 hours before testing. The test temperature is 25± 2 ℃. The performance of the capacitor should meet the following requirements | ||||||
Capacity change rate | Within ± 30% of the initial value | ||||||
Loss angle tangent value | Below 300% of the specified value | ||||||
Leakage current | Below the specified value | ||||||
High temperature storage | Store at 105 ℃ for 1000 hours, and then test at room temperature for 16 hours. The test temperature is 25 ± 2 ℃. The performance of the capacitor should meet the following requirements | ||||||
Capacity change rate | Within ± 20% of the initial value | ||||||
Loss angle tangent value | Below 200% of the specified value | ||||||
Leakage current | Below 200% of the specified value |
Product Dimensional Drawing


ΦD×L | A | B | C | E | H | K | α |
6.3*7.7 | 2.6 | 6.6 | 6.6 | 1.8 | 0.75±0.10 | 0.7MAX | ±0.4 |
8*10 | 3.4 | 8.3 | 8.3 | 3.1 | 0.90±0.20 | 0.7MAX | ±0.5 |
10*10 | 3.5 | 10.3 | 10.3 | 4.4 | 0.90±0.20 | 0.7MAX | ±0.5 |
Ripple current frequency correction coefficient
Frequency(Hz) | 50 | 120 | 1K | ≥10K |
coefficient | 0.35 | 0.5 | 0.83 | 1.00 |